ISDe270-30B Automotive Engine

The DCEC ISDe270-30B truck engine is a 6-cylinder in-line, 6.7-liter four-stroke engine with 107 mm caliber and 124 mm stroke with electronically controlled high pressure common rail, and the DCEC ISDe270-30B car engine with turbocharger and air-air intercooler with EURO III rear processor.

The DCEC ISDe270-30B truck engine has a main power of 266 HP at 2500 RPM.

As part of EMAC, DuraMac offers a complete powertrain integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng dana shaft and Komman air suspension, while the electrification of vehicles is the inevitable future, DuraMac is also involved in truck powertrain systems.

We provide all customers with the full life cycle service from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from troubleshooting to overhaul technical support.

Advantages of DCEC ISDe270-30B Automotive Engine

Advanced electronic control integrated system share information among high-speed datalinks, to ensure that the engine maintains the best operating status, effective fuel savings and low emissions under various loads.
With higher injection pressure up to 1600 bar, High Pressure Common Rail Fuel System features more precise control of injection timing and amount of fuel, more complete combustion, broader economical fuel consumption zone tremendously enhanced fuel economy, thus further improving low-speed performance, and resulting in better noise reduction and cold start performance.
Fast startup, good acceleration and gradeability, superior torque output at low speed.
Highly integrated engine subsystems can realize excellent power, ultra long service life, and long maintenance intervals.
Advanced electronic control integrated system, large-capacity electronic control module, collect information from all drive train components such as electronic gearbox, ABS brake and ASR anti-skid through standard data bus, forming a seamless information flow…

Technical Specifications

Engine Model:	ISDe270-30B
Engine Type:	6
Displacement:	6.7 L
Rated Speed:	2500 RPM
Rated Power / Speed:	266 HP @ 2500 RPM
Peak Torque:	970 N.m @ 1200 – 1700 RPM
Fuel System:	Bosch HPCR
Aspiration Method:	TC & Charge Air Cooled
Emission Standard:	EU Stage III
*Bore Stroke:**	107 mm * 124 mm
*Packing Size(L W * H):**	N/A
Wet Weight:	530 kg
Lead Time:	15 – 30 Working Days
Payment Terms:	T/T ,L/C

Oil Filter DCEC ISD4.5 Automotive Engine

coming soon

Engine Model	Advertised Power	Peak Torque	Number Of Cylinders	Fuel System
ISDe210-30A	207 HP @ 2500 RPM	800 N.m @ 1400 RPM	6 Cylinders	Bosch HPCR
ISDe210-30B	210 HP @ 2500 RPM	800 N.m @ 1200 – 1700 RPM	6 Cylinders	Bosch HPCR
ISDe230-30	226 HP @ 2500 RPM	900 N.m @ 1400 RPM	6 Cylinders	Bosch HPCR
ISDe245-30	241 HP @ 2500 RPM	925 N.m @ 1400 RPM	6 Cylinders	Bosch HPCR
D6.7NS6B260	256 HP @ 2300 RPM	1000 N.m @ 1100 RPM	6 Cylinders	Bosch HPCR
ISDe270-30A	266 HP @ 2500 RPM	970 N.m @ 1200 – 1700 RPM	6 Cylinders	Bosch HPCR
ISDe270-30B	266 HP @ 2500 RPM	970 N.m @ 1200 – 1700 RPM	6 Cylinders	Bosch HPCR
ISDe285-30	281 HP @ 2500 RPM	970 N.m @ 1200 – 1700 RPM	6 Cylinders	Bosch HPCR
ISDe285-50	281 HP @ 2500 RPM	1020 N.m @ 1200-1800 RPM	6 Cylinders	Bosch HPCR
D6.7NS6B290	289 HP @ 2300 RPM	1100 N.m @1200 RPM	6 Cylinders	Bosch HPCR
——END——

General Infomation of DCEC ISDe270-30B Automotive Engine
Engine Model	ISDe270-30B	Advertised Power	266 HP @ 2500 RPM
Peak Torque	970 N.m @ 1200 – 1700 RPM	Curve&Datasheet	FR92159
Fuel System	Bosch HPCR	No. Of Cylinders	6
Aspiration	Turbocharged & Air-Air Intercooler	Displacement	6.7 L
*Bore Stroke**	107 mm * 124 mm	CPL Code Revision	1995
Dry Weight	509 kg	Wet Weight	530 kg
Compression Ratio	17.3 : 1

Installation Data of DCEC ISDe270-30B Automotive Engine
Center of Gravity. Distance From Front Face of Block		402 mm
Center of Gravity. Distance Above Crank Centerline(Above Crankshaft)		144 mm
Maximum Bending Moment At Rear Face of Block		1360 N.m
Maximum Crankshaft Thrust Bearing load limit- Intermittent load		3781 N
Maximum Crankshaft Thrust Bearing load limit-Continuous load		1779 N
Instantaneous Inertia At Rotating: (Without Flywheel)		N/A
Emissions Certification		GB 17691－2005
Idle Speed		600 – 800 RPM
Maximum Non-Load Speed		2850 RPM
Over Speed Performance (Within 15 Seconds)		4200 RPM
The Clutch Torque @ 800 RPM		610 N.m
Maximum Altitude At Which Continuous operation Is Allowed		3000 m
Supercharger outlet Exhaust Pressure limit Value		413 kPa
Maximum Power of Exhaust Brake		N/A
——END——

Engine Performance Data Rated power of DCEC ISDe270-30B Automotive Drive Engine
Engine Speed	2500 RPM	2300 RPM	1400 RPM	Oil Pressure	N/A	N/A	N/A
Air to Turbo	N/A	N/A	N/A	Air From Turbo	N/A	N/A	N/A
Exhaust Flow	N/A	N/A	N/A	Exhaust Temp	N/A	N/A	N/A
Fuel Consumption	220 kg/hr	N/A	N/A	Coolant Flow	215 L/min	187 L/min	125 L/min
Heat Rejection-Coolant	95.0 kW	91.0 kW	75 kW	Heat Rejection-Air	39.0 kW	36.0 kW	21.8 kW
Friction Power	38.0 kW	30.6 kW	16.7 kW
——END——

System Technical Data of DCEC ISDe270-30B Automotive Drive Engine
Air Intake System	Maximum Temperature Rise Between Ambient Air and Engine Air Inlet	15 ℃
	Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Medium Duty	2.9 kPa
	Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Heavy Duty	3.7 kPa
	Maximum Intake Restriction with Dirty Filter	6.2 kPa

Turbocharged & Intercooled	Maximum Intake Air Temperature Rise Between Ambient and Intake Manifold	30 ℃
	Maximum Pressure Differential Between Supercharger Compressor Outlet and Intake Manifold Inlet	13.5 kPa
	Usually Suitable Intake Pipe Diameter	65 mm

Exhaust System	Maximum Exhaust Resistance with Exhaust Pipe and Muffler	10 kPa
Exhaust System	Usually Suitable Exhaust Pipe Diameter	75 mm

Lubrication System	Oil Sump Capacity-Upper Limit	11 L
	Oil Sump Capacity-Lower Limit	8.9 L
	Capacity of The Whole System	13 L

Cooling System	Coolant Capacity – Engine only	7 L
	Standard Thermostat (Modulating) Range	83 – 95 ℃
	Maximum Coolant Pressure (without Pressure Cap, Thermostat Closed)	200 kPa
	Maximum Coolant Temperature Engine out	100 ℃
	Maximum Degassing Time	25 mins
	Maximum Coolant Flow to Accessories	37 L/min
	Minimum Recommended Coolant Temperature	70 ℃
	Minimum Water Addition Rate	19 L/min
	Minimum Coolant Expansion Space – % of System Capacity	6 %
	Minimum Drop Tank Volume without Expansion Tank (% of total Cooling System)	11 %
	Minimum Allows Pressure of Pressure Cap	50 kPa
	Coolant Alarm Temperature	104 ℃
	Common Operating Temperature Range of Fans with Fan Clutch	93 ℃

24V Electrical System	Maximum Allowable Resistance of Cranking Circuit	0.004 Ω
24V Electrical System	The Cold Start Current When Engine and The Clutch Separate	550 CCA

Cold Starting System	Maximum Unaided Cold Start Temperature	120 RPM -12 ℃
Cold Starting System	Minimum Cold Start Temperature with Auxiliary Starter	120 RPM -35 ℃

Fuel System	Maximum Oil Inlet Resistance of The Oil Transfer Pump with A Clean Filter	30 kPa
	Maximum Fuel Return Resistance	20 kPa
	Minimum Oil Discharge Capacity of Fuel Tank	0.2 m³/hr
	Maximum Fuel Temperature (At The Fuel Pump Inlet)	70 ℃
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

What's the Standard Scopes of Supply?

With full ranges of emission standard from Euro 2 to Euro 7, Dongfeng Cummins producing 12 series automotive engines, started from 3.9 liter engine, to 15 liter engine, covering the power range of 125HP to 650HP.
Dongfeng Cummins automotive engine customize developing configurations for big vehicle OEMs in China, based on each of requirement, Dongfeng Cummins producing dozens of different configuration engines with same engine model number, which only SO-Shop Order will be different with each other, the SO number is the identify number of the engine configuration of each model.
Even with same engine model, different SO number engine can have very different configuration with each other, with different prices. Some of SO-Shop Order is not available for commercial market, such as restricted models (Usually for military specifications).
EMAC offering most common, cost effective models which also able to process the production in Dongfeng Cummins, which usually have following accessories as standard configuration.

Scopes of Supply of DCEC Automotive Engine
Air Intake System	1. Air Intake Manifold	Exhuast System	1. Exhuast Manifold
	2. Water-Air Intercooler		2. Turbocharger
	3. N/A		3. Exhuast Elbow

Fuel System	1. Fuel Transfer Pump	Starting System	1. Starter Motor
	2. High-Pressure Fuel Pump		2. Starter Rely
	3. Fuel Filter		3. N/A

Charging System	1. Charging Alternator	Engine Shut-Down System	1. Engine Puel Shut-Off Solenoid

Lubricating System	1. Oil Pump	Cooling System	1. Water Pump
	2. Oil Filter		2. Engine Fan
	3. N/A		3. Standard Radiator

Power Output System	1. Flywheel	Engine Mounting System	1. Engine Mouting Bracket
Power Output System	2. Standard Fflywheel Housing	Engine Mounting System	2. N/A

Engine Auiliary Accessories	1. Air Compressor
Engine Auiliary Accessories	2. Power Steering Pump
------END------

What's the Available Optional Items?

Dongfeng Cummins only provides customize service for the large quantity orders or large OEMs, which means usually the order quantity are higher than 1000 units. For the small quantity engine project, EMAC provides customize services with our own resource and engineer team.
EMAC have rich experience on the customize developing, which provides abundant optional items based on the requirement of each project. The typical optional items are special Prestolite charging alternator, prestolite starter motor, Knorr Air compressor. Valeo air conditioning compressor, ECU output socket set, engine accelerate pedal etc.

Optional Accessories of DCEC Automotive Engine
Air Intake System	1. Air Intake Pre-Heater	Exhuast System	1. Muffler & Bellows
	2. Air Intake Shut-Off Valve		2. Flame Trap
	3. Air Filter		3. Spark Arrestor Type Muffler & Bellows
	4. Air Intake Pre-Filter		4. DPF System
	5. Air Filter Alarm System		5. N/A

Fuel System	1. Coarse Filter	Starting System	1.Manual Magnetic DC Contactor
	2. Fuel Pre-Heater		2. Dual Ears Flywheel Housing
	3. N/A		3. Spring Starter Motor
	4. N/A		4. Air Starter Motor
	5. N/A		5. Hydraulic Starter Motor

Lubricating System	1. Oil Pre-Heater.	Cooling System	1. Silent Type Radiator
	2. N/A		2. Plateau Radiator
	3. N/A		3. Salt-Spray Resistant Radiator
	4. N/A		4. Coolant Pre-Heater

Power Output System	1. Clutch	Engine Mounting System	1. Shock Absorber Pad

Engine Auiliary Accessories	1. Hydraulic Oil Pump	Control System	1. Can Add Mechanical Accelerator Pedal
	2. Air Conditioner Compressor		2. N/A
	3. N/A		3. N/A

------END------

As part of EMAC, DuraMac is Committed to providing reliable powertrain system to commercial vehicle manufacturers around the world, a sub-brand of EMAC group that focusing on automotive application. Based on dozens of world-class engine manufacturing resources in China, and as official exporting agent of Fast tranmission (Joint venture with Caterpillar AT tranmission), Dongfeng Dana axle and Komman air suspension, DuraMac provides one-stop solutions covers from pre-design to components supply, from installation to commissioning, from pre-sales communication to after-sales service support.
For more information of our automotive power system products, you are welcome to visit DuraMac homepage: www.duramac.com

What's the Modifiable Items and Scopes?

As explained in the standard scopes of supply, Dongfeng Cummins not able to provide customize developing for small quantity projects or small OEMs, so EMAC helps SME OEMs to provide customize services, not only providing additional optional items, but also provides customize modification services to meet their requirements based on the exisiting engine SO number.
As flexible service ability is our core advantages, EMAC is very experienced and good at providing customize services, the common customize services are as below:
1: AIr Intake System: Change the air intake direction.
2: Air Exhuast System: We are able to change the turbocharger direction as the interaction on installation could be occured, also change change the air exhuast direction.
3: Lubricating System: Modify lubricating system is one of the most common requirement from customer, we can provide flat-type engine oil pan, to lower down total engine height, which usually required for special vehicles. For the standard engine oil pan, we also can change the direction of the engine oil pan.
4: Cooling System: There are lots of options for the engine cooling system, for the engine fan, we can provide customize for the material of engine fan (plastic fan or steel fan), wind direction of the engine fan (blower fan or suction fan ) and types of engine fan (mechanical fan or electric control fan).
3: Lubricating System: Modify lubricating system is one of the most common requirement from customer, we can provide flat-type engine oil pan, to lower down total engine height, which usually required for special vehicles. For the standard engine oil pan, we also can change the direction of the engine oil pan.
6: Electric System: All of Dongfeng Cummins engines are comes with standard 24V electric system, while some customer need to modify the electric system into 12V, we can also modify the starter motor and alternator into appointed brand or appointed specifications.
EMAC is your reliable professional power system partner, feel free to contact our services team to get detailed information about our standard scopes of supply, optional items and modifiable parts for our Dongfeng Cummins automotive engine, we are ready to explore the journey of our cooperation.

How to Order Engine to Replace Your Old Engine?

There are three types of engine replacements demand, type A is to replace the old Dongfeng Cummins engine, the original engine is produced by Dongfeng Cummins, type B is to replace Cummins engine produced in other countries including UK, USA, Mexico, India or Japan Komatsu Cummins, type C is to replace other brands engine or even gasoline engines with Dongfeng Cummins produced engines. The detailed introduction and replacement process are as below:

Type A: Engine Replacement Requirement (Original Engine is Dongfeng Cummins Engine).

This is most simple demand case, you just need to provide us the original engine name plate, and then we can easily check and confirm what exactly you need, and we also ensuring that the engine from us will be 100% same with your original engine. (In some case that the vehicle manufacturing modify the engine on their own, we are not able to supply the parts or the condition that modified by the vehicle manufacturer)

Type B: Engine Replacement Requirement (Original Engine is Cummins Engine but produced in UK, USA or other Cummins engine plant).

EMAC have rich experiences in replace the UK, USA or other engine plant produced engine, with Dongfeng Cummins produced Cummins engines, we required the original engine name plate photo to obtain the related information (at least we will need engine serial number, with engine model name only is useless for us, we are not able to provide quotation with engine model name only for the replacement project), and then we can check out the BOM list and all accessories of your original engine serial number, and then we can check and compare with the BOM list of our Dongfeng Cummins produced engine, choose the most closest SO number engine, and modify the parts that not same with your original engine, we have delivered hundreds of cases of replace the customer's original engine that produced in Cummins UK, USA or other engine plants with Dongfeng Cummins produced engines, you can refer to our video introduction on Youtube: https://youtu.be/dYVgRM5NsUo

We can NOT guarantee the engine produced by Dongfeng Cummins is exactly same with your original engine, but we can guarantee that all of engines from EMAC will have no problem with installtion and performance, which all of engines can works very well after replacement.

Type C: Engine Replacement Requirement (Original Engine is other brnad engines even gasoline engines).

EMAC also have rich experiences in replace the engine that not Cummins installed, these engines can be other brands such as Deutz, Caterpillar, Perkins, Komatsu or others, we even had experiences of replace gasoline engine with Dongfeng Cummins produced diesel engines.
This kind of appliaction is more complex and quite risky, EMAC can't do much thing due to lacking of information, the only thing we can guarantee is the performance after replacement, we check and compare the engine performance curve of original engine and our Dongfeng Cummins engine, and then we select the most suitable model for replacement. Due to we are lacking of the installation spaces and related accessories, we will send the both CAD and 3D drawing for our recommend engine model, and then customer have to evaluate the risky of replace the original engine with our engine, especially the risky of space, the possibile interactive when installation, and the risky of modify related coolant pipe, air pipes and wiring harness. Normally this kind of request consuming lots of energy and resource for us to carry on, also quite risky for us, so we will not work on the replacement quantity that below 50 units.
When your requirement is replacement, please tell our customer service team of what type of replacement you need, and provide us original engine name plate, the engine name plate is the necessary material before we start our business negotiations, we will NOT reply to all inquiry that even can't provide engine name plate.

How to Select Suitable Dongfeng Cummins Automotive Engine for Your Vehicle?

To choose a suitable engine for truck, bus or special vehicle manufacturer is quite simple, because the buyer is the manufacturer, so usually they are quite flexible with space, pipes and wiring connections.
The following process are the standard process for us to select a suitable engine model for truck, bus or special vehicle manufacturer demand.
Step 1: We need basic information of the required engine, including rated power, rated speed and emission standard of the required engine.
Step 2: EMAC will evaluate the requirement and select the suitable engine model for customer, with engine data sheet, engine performance curve, CAD darwing, 3D model and budgetary quotation provided back to customer.
Step 3: Customer should check and compare the engine data sheet, performance curve and related drawing and confirm all details one by one. Most important thing is confirm the performance curve suitable for the requirement.
Step 4: After engine confirmed, we have to check and confirm the specifications of accessories one by one carefully, like the electric system specifications (12V or 24V), the detailed specifications of starter motor, charging alternator, air compressor, power steering pump, A/C compressor etc.
Step 5:Confirming the accessories positions and connections, customer need to check and confirm all positions are suitable for the project, such as engine fan, turbocharger, oil pan position, and connections of air pipe, coolant pipe, wiring harness etc.
Step 6: After confirming the engine performance, position, connection and specifications of all accessories, we will be able to provide accurate quotation for prototype and batch order. Prototype is strongly recommend to start the cooperation, to avoid the possible problem, risky on the engine with batch order.

Notes:

1: Technical support including technical training, onsite installation and commissioning services are avaiable with additional chargers.
2: We are able to supply complete powertrain system, including engine, transmission, transfer, axle, suspension etc, engine with transmission is highly recommended, because if we supply both engine and transmission, we can run simulations for the vehicle, which we usually will provide customer a simulation report, with the simulated result of Balanced Maximum Vehilce Speed and Maximum Grade Ability at different speed.
3: EMAC able supply complete chassis that integrate all powertrain system together, which can greatly reduce the manufacturer's design works and reduce the system mismatching risky.

Tips of Dongfeng Cummins Automotive Engines!

Dongfeng Cummins is one of 50:50 joint venture of Cummins in China, its official Cummins factory that following high Cummins USA production and quality control standard, the Dongfeng Cummins factory swap every 5 years between appointed employee from Dongfeng Motor and Cummins. For more details, you can refer to the company introduction of DCEC-Dongfeng Cummins Engine Company.

Company Introduction: DCEC Engine Company

DCEC Engine Co., Ltd. (DCEC), located in Xiangyang, Hubei Province, is a 50/50 joint venture between DCEC Inc. and Dongfeng Automobile Co.,Ltd. In 1986, Dongfeng Automobile Co.,Ltd. signed a license agreement with DCEC Inc. for B-series engines. DCEC Engine Co., Ltd. was established in June 1996, with registered capital of over 100 mi...

Started the production of Cummins engines in China in 1980s, Cummins products has been in China for over 40 years, thousands of people have worked for Cummins China and some of them are very skilled experienced engineer, some of them resigned from Cummins to set up their own small workshops or assembly factories that focusing on producing copy Cummins engines.

A Sad Experiece With Counterfeits DCEC Generator Set

Whoever dealing with Chinese suppliers should always remember that, price is always not a problem with your Chinese suppliers, but trust is the problem! EMAC might can't give you lowest price, but EMAC never cheat any of customer and always be responsible for all of our business partners.

Price is always not the problem for Chinese suppliers, there are many tickies to lower down the engine prices, such as supply self-rebuild engine as new engine, supply official RECON engine from Cummins as brand new engine, assembly the fake engine with after-market parts, supply lower power model engine and change the name plate etc. You can find plenty of suppliers on alibaxx.com with various prices, the classic Chinese business style is tell you that he give you very low price and not make profit, how can you believe a businessman will make business that have no profit? They gave you low price not becuase they share their profit to you?
As a matter of fact, Chinese supplier often make their profit much more higher by selling the low quality copy products as genuine brand new products! Always remember YOU GET WHAT YOU PAID!
The key point of dealing with Chinese supplier, is to find and choose reliable business partner that will not cheat you for short-term business, but with vision of build long-term career and life-time partnership, EMAC is one of the reliable partner that not chasing for short-term high profit, but we cares our decades of good reputation and we working with all business partners not as supplier and customers, but as close friend and brothers.

FAQ of Dongfeng Cummins Automotive Engines?

1: What mean by DCEC?

DCEC is the short name of Dongfeng Cummins Engine Company, take the first letter of each word, it comes with DCEC as short name, for more details about DCEC, you can refer to the company introduction of DCEC-Dongfeng Cummins Engine Company.

Company Introduction: DCEC Engine Company

DCEC Engine Co., Ltd. (DCEC), located in Xiangyang, Hubei Province, is a 50/50 joint venture between DCEC Inc. and Dongfeng Automobile Co.,Ltd. In 1986, Dongfeng Automobile Co.,Ltd. signed a license agreement with DCEC Inc. for B-series engines. DCEC Engine Co., Ltd. was established in June 1996, with registered capital of over 100 mi...

2: Does your engines copy products?

This question is quite often from customer that not familiar with Cummins, Cummins have over 20 joint ventures in China now, and 6 of them are engine joint venture, which Cummins owns 50% share of all of those 6 engine plants, so all of the Cummins factories in China are genuine Cummins factory, that following high Cummins USA production and quality control standard. EMAC is the business partner of DCEC, and we are supplying powertrain and engine power pack based on genuine brand new engines from Dongfeng Cummins for all different applications, EMAC is a reliable and professional power system solution provider that offering abundant various options.

3: Why there are so many companies selling Cummins engines?

There are plenty of companies selling Cummins engines in China, especially on the B2B platform, such as alibaxx.com, you can find plenty suppliers there with attractive prices, Cummins products has been in China for over 40 years, thousands of people have worked for Cummins China and some of them are very skilled experienced engineer, some of them resigned from Cummins to set up their own small workshops or assembly factories that focusing on producing copy Cummins engines. You should be careful of being cheated by the attractive prices with copy or rebuild products.

4: How can I identify if the engine genuine or not?

Cummins keep working on the updating its identification system, technically, there are serial number on all key components of Dongfeng Cummins engines, including cylinder block, cylinder head, turbochager, fuel pump, starter motor, alternator, you can collecting the serial number (NOT part number), and then call DCEC call service center to identify if all the numbers are matching to the original number or not. EMAC continuously updating the latest Cummins identification system, you are welcome to following our website or keep in touch with our customer services team to get latest information from Cummins.

5: What's the warranty policy for the engines supplied by EMAC?

EMAC following standard Dongfeng Cummins warranty policy, which will update sometimes, you can following us to get the latest warranty policy from Dongfeng Cummins. Generally EMAC only afford the defective parts cots and shipping costs for the warranty claims, labor costs and transportation costs are not covered in the warranty.
However, EMAC is building our own independant after-sales service system now, which aims to build a global service network, with resouces of global repair and engineering network, which we believe can bring all business partner benifit in future, helping all of OEM manufacturers expanding their market into global market without worries of lacking after-sales service network. For more details about our Global Service, you can visiting www.global-service.com.

6: How about the future parts supply for the engines? Are you able to supply parts?

As the support team of EMAC's business scope, PartMac is our own brand that focusing on genuine parts directly from all brand factories.
All of EMAC’s partners are facing big challenges with sourcing original spare parts in China. Committed to providing truthworthy and professional after-sales support and parts supply, PartMac is a sub-brand of EMAC group that focusing on parts business. Stick to original parts only, PartMac can’t give any solution on CHEAP PARTS, but you don’t need to worry about any quality issues with every single parts from PartMac.